Removing The Camera Module; Prerequisites - Dell XPS 2720 Owner's Manual

Removing the Camera Module

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the back cover. See "Removing the Back Cover" on page 17.
2 Remove the trim cover. See "Removing the Trim Cover" on page 19.
3 Remove the stand. See "Removing the Stand" on page 21.
4
Remove the I/O panel. See "Removing the I/O Panel" on page 40.
5 Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
6
Remove the inner frame. See "Removing the Inner Frame" on page 49.
7 Remove the processor heat-sink fan. See "Removing the Processor Heat-Sink Fan"
on page 51.
8
Follow the instructions from step 1 to step 12 in "Removing the Display Panel" on
page 89.
98
| Removing the Camera Module