Replacing the Converter Board
Procedure
1
Align the screw holes on the converter board with the screw holes on the chassis.
2
Replace the screws that secure the converter board to the chassis.
3
Connect the cables to the connectors on the converter board.
Postrequisites
1
Replace the back cover. See "Replacing the Back Cover" on page 20.
2
Replace the stand. See "Replacing the Stand" on page 18.
3
Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
30
|
Converter Board