Table of Contents
Advertisement
32
On Board Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA
Channel
K/B Wake Up Function
Mouse Wake-up
Function
Onboard IDE
Hardware Monitor
The hardware Monitor allows you to monitor your system variables, such
as temperature, FAN speed, and voltages, all can be monitored through
this page. There are no settings that can be changed on this page.
Supervisor Password
The main difference between the User and Supervisor Password is that
the Supervisor Password allows access to all BIOS settings, however on
Choose from: Auto, Disabled, 378, 278,
or 3BC.
Auto:
Set the parallel port to an IO
address automatically.
Disabled: Disable the onboard parallel
port and the parallel port
options below will not be
available for change.
Choose from: Normal, Bi-Dir, EPP, or
ECP.
If EPP is selected rom the above option,
choose either 1.7 or 1.9 version here.
Choose either IRQ 5 or 7 for the parallel
port.
Choose either DMA channel 1 or 3 if
appropriate.
Set this option to Enabled to enable the
Keyboard Wake Up function.
Set this option to Enabled to enable the
Mouse Wake Up function.
Set this option to Both for normal use. If
need to disable the onboard IDE
controllers, choose from the following:
Disabled, Primary (disable secondary),
Secondary (disable primary).
BIOS Setup
Advertisement
Table of Contents
