Hardware Monitor Page - SOYO SY-P4VM800 Quick Start Manual

Ratio Actual Value
Ratio CMOS Setting
DRAM Frequency
CPU Over-clocking
Func.
CPU Frequency

3.11 Hardware Monitor Page

This page sets up some parameters for the hardware monitoring function of this motherboard.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
*** System Hardware Monitor***
Vcore
Vdimm
Vivdd
Vcc5V
SB3V
VBAT
CPU FAN Speed
SYSTEM FAN Speed
CPU Temperature
SYSTEM Temperature
↑↓←→ : Move
F1: General Help
CPU/SYSTEM FAN
Speed
CPU/ System
Temperature
SOYO SY-P4VM800 Quick Start Guide
If the item "Ratio Status" shows "Locked", you will not be able
to see the item "Ratio Actual Value" on the screen.
This item selects the ratio of the CPU installed in your system.
If the item "Ratio Status" shows "Locked", you will not be able
to see the item "Ratio CMOS Setting" on the screen.
This item shows the frequency of the DRAM in your system.
This item decides the CPU over-clocking function installed in
your system. If the over-clocking fails, please turn off the
system power. And then, hold the PageUp key (similar to the
Clear CMOS function) and turn on the power, the BIOS will
recover the safe default.
This item shows the frequency of the CPU installed in your
system.
Hardware Monitor
:1.280V
:2.576V
:1.520V
:4.954V
:3.184V
:3.184V
:4440 RPM
:0 RPM
:72°C/161°F
:32°C/89°F
Enter: Select +/-/: Value
F9: Optimized Defaults
This item indicates CPU and SYSTEM cooling fan speed
in RPM.
These items display CPU and System temperature
measurement.
25
Help Item
F10: Save Esc: Exit