Other Functions - Delta Electronics PCI-DMC-A01 User Manual

3.10 Other Functions

When you are finished with 1-axis or multi-axis motion control, you can use "File / Save
Configuration" from the menu to save your motion control parameters. The next you open
EzDMC, "File / Load Configuration" from the menu can be used to load the motion control
parameters you previously set into EzDMC to begin motion control right away. Fig. 3.16
(indicated by an arrow) shows the position of the menu option described above.
Revised May, 2012
Chapter 3 Using EzDMC | PCI-DMC-A01 / PCI-DMC-B01
Figure 3.16
3-13