➋ User login and status display field.
➊
➋
➌
➎
➍
The above input fields all have 1 to 8 bits and accept hexadecimal values
between 0 and F.
➊ Card ID of DMCNET motion card.
➋ User login and status display field.
➌ Generate verify key.
Revised May, 2012
Default password
Password1
FFFFFFFF
Password2
FFFFFFFF
(If login is successful, status will display "Pass" and grant access to the
functions in Blocks ➌,➎ and ➏ in Fig. 3.13; if not, status will display
"Failed", and the user must re-login)
Figure 3.13 Open Master Security interface after user login.
Step 1:
Click on "Read" button read the product serial number. This gives
two sets of 1 to 8 bit values made up of hexadecimal values
between 0 and F.
Chapter 3 Using EzDMC | PCI-DMC-A01 / PCI-DMC-B01
➏
3-9