Chapter 3 Using EzDMC | PCI-DMC-A01 / PCI-DMC-B01
3.9
Card Reset
When you are finished with serial motion control and wish to turn off the EzDMC program,
please click on "Hardware / PCI_Card_Reset" to reset the PCI-DMC-A01 card. Initialize the
PCI-DMC-A01 card again the next time you wish to test/use the card to ensure that the
stability of data transmission/reception and the validity of test data. As shown in Fig. 3.15,
clicking this function resets the card. The card will be re-initialized the next time "Search
Card" is executed.
3-12
Figure 3.15
Revised May, 2012