Ashly 3.04 Operating Manual page 31

WR-5,
The WR5/neWR5 Gain block is the DSP block where channel gain adjustments are
made via the WR5 or ne-WR5 remote. This block is nearly identical to the standard gain block
except that it is also controllable via the WR5 or ne-WR5 remote and does not have polarity
inversion. This block may be linked for room-combining situations.
Equalization
3)
Graphic Equalizer
The graphic equalizer offers 31
standard ISO center frequency controls
with Constant Q or Proportional Q filters,
as well as adjustable filter bandwidth. The
Flatten button returns all filters to nomi-
nal. Individual filters can be returned to
nominal by pressing <Ctrl + Click> on
the fader knob. A course EQ curve can be
drawn quickly by left-clicking and drag-
ging across the EQ frequency response
display. Multiple graphic equalizers may
be assigned to a Link Group so that their
controls will track.
Parameters
Filter Type - This selects
Proportional Q or Constant Q (default)
filters. Constant Q filters have consistent
Q/Bandwidth regardless of the amount of
boost or cut. Proportional Q filters get
narrower with increasing boost/cut. Dif-
ferences in filter shapes can be observed
on the frequency response display.
Bandwidth - This sets the Bandwidth of the filters, from 1/4 octave to 1/2 octave (before Proportional Adjustment).
The default bandwidth is 1/3 octave.
Link Group - Link Group to which this block is assigned, useful for stereo signals.
Faders - Graphic representation of 31 filter amplitude controls.
Operating Manual - nX, nXe, and nXp Power Amplifiers
neWR-5 Remote Control Gain
31