Table of Contents
Advertisement
Paper and Other Media
er. Then slide it inside until it
stops.
Type 1 Printer: Loading
Envelopes
As there are so many kinds of enve-
lopes, be sure to check if those to be
used are supported by this printer.
Important
Even when the optional envelope
feeder is not installed, you can
specify the sizes for the envelopes
for Tray 2 using the operation pan-
el. However, make sure that the
envelopes are not loaded into the
tray without the envelope feeder.
To install the envelope feeder, the
9
installation of the optional paper
unit is required.⇒ P.16 "Type 1
Printer: Installing the Envelope Feed-
er Type 2000"
Reference
For more information on the enve-
lopes, see P.74 "Paper types and cau-
tions".
Type 1 printer: loading envelopes onto
the bypass tray
Note
Please refer to the inside of the
front cover of this manual to con-
84
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
Important
With the bypass tray, you can load
up to 10 envelopes at a time. For
more information on envelopes,
see P.74 "Paper types and cautions" .
A
Open the bypass tray.
TS3Y190E
B
Slide the side guides. Slide out
the bypass tray extender and flip
it open.
C
Load envelopes until it stops,
with the print side down and the
TS3Y110E
TS3Y131E
Advertisement
Table of Contents
