Macintosh - Installing The Ppd File - Ricoh AP1400 Operating Instructions Manual

Installing the PostScript Printer Driver
C
On the [File] menu, click [Properties].
The Printer Properties appears.
D
Click [Device Settings] tab.
E
Under [Installable Options], select the option you have installed to your print-
er.
The current setting is displayed in the [Change Setting] box in the lower part of
the tab.
F
Use the [Change Setting] list to select the appropriate setting for the selected
option.
G
Repeat steps E– F for all options.
H
After making all settings for options, click [OK].

Macintosh - Installing the PPD File

You can use the LaserWriter printer driver that comes with your Macintosh
6
when printing from a Macintosh. However, if you use the LaserWriter driver
alone, you cannot use the printer specific functions. The printer specific func-
tions can be used by installing the PPD file.
Note
The LaserWriter printer driver for Macintosh does not come with this printer.
Use the appropriate printer driver that comes with the Macintosh you are us-
ing.
See the documentation that comes with your operating system for details on
the functions of the LaserWriter 8 printer driver.
Installing the PPD File
A
Start up your Macintosh.
B
Double-click the icon of your Macintosh hard disk to open it.
C
Open the [Extensions] folder inside the [System Folder] by double-clicking it.
D
Insert the CD-ROM that comes with the printer into the CD-ROM drive of
your Macintosh.
The icon of the CD-ROM appears.
E
Double-click the CD-ROM icon.
The contents of the CD-ROM are displayed.
44