Restoring The Network Settings To Factory Default; Printing The Network Configuration List - Brother MFC-7840N Network User's Manual

Restoring the network settings to factory default

If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Factory Reset.
Press OK.
d
Press 1 to choose Reset.
e
Press 1 to choose Yes for reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.

Printing the Network Configuration List

Note
Node name: Node name appears in the Network Configuration List. The default node name is
"BRNxxxxxxxxxxxx".
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
Press Reports.
b
Press a or b to choose Network Config.
Press OK.
Control panel setup
3
3
3
42