Operation; Pre-Ride Inspection - Honda CB1000R Owner's Manual

OPERATION

6

PRE-RIDE INSPECTION

For your safety, it is very important to take a
few moments before each ride to walk around
your motorcycle and check its condition. If you
detect any problem, be sure you take care of
it, or have it corrected by your Honda dealer.
n WARNING
Improperly maintaining this motorcycle or
failing to correct a problem before riding can
cause a crash in which you can be seriously
hurt or killed.
Always perform a pre-ride inspection before
every ride and correct any problems.
74
1. Engine oil level - add engine oil if required
(page 50). Check for leaks.
2. Fuel level - fill fuel tank when necessary
(page 47). Check for leaks.
3. Coolant level - add coolant if required.
Check for leaks (page 44).
4. Front and rear brakes check operation;
make sure there is no brake fluid leakage
(page 39).
5. Tyres - check condition and pressure
(page 51).
6. Drive chain - check condition and slack
(page 107).
Adjust and lubricate if necessary.
7. Throttle - check for smooth opening and
full closing in all steering positions.