Removing The Seat; Fitting The Seat - Honda CB1000R Owner's Manual

SEAT

Removing the seat

To remove pillion seat (1), insert the ignition
key in the seat lock (2) and turn it clockwise.
Pull the seat backwards and lift.
To remove the rider seat (3), unscrew the
socket screw (4) with bushing (5) and pull the
seat backwards and lift.

Fitting the seat

To install the rider seat, insert the lateral
protrusions in the location as shown in the
picture. Now fit the bushing and socket screw
and tighten fully.
To install the pillion seat insert the two
protrusions in the locations in the rear
subframe and press the rear of the seat
downwards.
After installing, check that the seat is securely
locked in position.
(4)
(3)
(5)
(1) Pillion seat
(2) Seat lock
(3) Rider seat
(1)
(2)
(4) Socket screw
(5) Bushing
67
5