Table of Contents
Advertisement
3
On-Screen Programming
3
User-Friendly Programming
We have designed your FAX/MFC with on-screen programming and a Help key.
User-friendly programming helps you take full advantage of all the functions your
FAX/MFC has to offer. (See Using This Manual, page 1-1.)
Since your fax programming is done on the LCD, we created step-by-step on-screen
prompts to help you program your FAX/MFC. All you need to do is follow the
prompts as they guide you through the function menu selections and programming
options and settings.
Function Mode
You can access the function mode by pressing Menu/Set. When you enter the
function mode, your FAX/MFC displays a list of main menu options from which you
can choose. These options appear one after the other on the display. Select a menu
option by pressing Menu/Set when the option appears on the screen. The display will
scroll the options within that menu.
You can "scroll" more quickly through options by pressing
displays your selection, press Menu/Set. (Press
your choice or to save key strokes. Both arrow keys show all options, in the opposite
order.)
Before you press Menu/Set after entering information in a field using the dial pad,
you can correct a mistake. Use
characters.
When you finish a function, the screen displays ACCEPTED.
If you want to exit the Function mode, press Stop.
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about how to
proceed. The display you'll probably see most often is shown below, showing you,
when you place an original in the ADF, that you can dial a number and send a fax, or
you can make a copy.
3 - 1
O N - S C R E E N P R O G R A M M I N G
to back up and then type over the incorrect
FAX: NO. & START
COPY: PRESS COPY
. When the screen
to scroll backward if you passed
- Quick Links:
- Remove Ribbon Protection Sheet
Hide quick links:
Advertisement
Table of Contents
