Various Messages - Korg TRITON Extreme Manual

Various messages

A
Are you sure ?
Meaning: This message asks you to confirm execution. To
execute press the OK button. To cancel, press the
Cancel button.
B
Battery voltage for calendar IC is low
Meaning: The calendar backup battery has run down.
Action: Replace the battery as described in "Replacing the
calendar backup battery" (☞p.319, 324).
Buffer overrun error occurred
Meaning: While sampling to the Media, the writing speed
could not keep up with the sampling processing.
Action: Execute the Media mode Utility page menu com-
mand "Check Medium." If this does not solve the
problem, copy several files from the media to
other media, then erase those files and execute the
operation again.
Sampling may not be possible in some cases depending
on the media you use. Please use the recommended
media.
If the "Buffer overrun error occurred" error message
appears, the data prior to the occurrence of the error
has been recorded, but the data at the point that the
error occurred may not play back correctly.
Buffer underrun error occurred
Meaning: While playing back a WAV file from the media,
the media could not be read fast enough for play-
back processing.
Action: Copy the desired file to another folder etc., and
then execute once again.
Action: Wave files on a USB device cannot be played back.
Copy the file to media inserted in the TRITON
Extreme's CF card slot, and execute the operation
again. Please use the recommended media. If this
message appears when you attempt to play back a
Wave file from media inserted in the CF card slot,
copy the file to a different folder and then execute
the operation again.
C
Can't calibrate
Meaning: Calibration could not be performed correctly.
Action: Try again.
Can't copy/swap double size effect
Meaning: When copying or swapping an insertion effect,
you attempted to place a double-size effect in
IFX1 or IFX5.
Action: Modify your settings so that a double-size effect is
not moved to IFX1 or 5, and execute again.
302
Can't open pattern
Meaning: When you finished recording or editing, it was
not possible to allocate enough memory to open
the pattern that was Put into the track. (When it
must be opened automatically.) If you press the
OK button, the pattern data will be deleted, and
the recorded or edited content will be saved. If
you press the Cancel button, the recorded or
edited content will be discarded.
Completed
Meaning: Execution of the command ended normally.
D
Destination and source are identical
Meaning: When copying or bouncing, the same cue list,
song, track or pattern was selected for both the
source and destination.
Action: Select a different cue list, song, track, or pattern
for the source and destination.
Destination from-measure within the limits of source
Meaning: When executing the Move Measure command for
all tracks or within the same track, the specified
destination measure is within the source range.
Action: Set a destination measure that is outside of the
source range.
Destination is empty
Meaning: When editing, the track or pattern that was speci-
fied as the destination contains no musical data.
Action: Select a track or pattern that contains musical
data.
Destination measure is empty
Meaning: The measure that was specified as the destination
contains no data.
Action: Specify a destination measure that contains data.
Destination multisample already exists
Meaning: A multisample already exists at the destination
(save location) multisample.
Action: Either delete the multisample at the destination
(save location), or change the save destination
multisample number.
Destination multisample and source multisample are
identical
Meaning: The same multisample is selected for the source
and destination.
Action: Select different multisamples for the source and
destination.
Destination sample already exists
Meaning: A sample already exists at the destination (save
location).
Action: Either delete the sample at the destination (save
location), or change the save destination sample
number.
Continue ?