About The Triton Extreme And Driver Ports - Korg TRITON Extreme Manual

Mac OS X users
When used with Mac OS X, the TRITON Extreme will auto-
matically use Mac OS X's built-in MIDI driver.
For use with Mac OS X, the TRITON Extreme requires
Mac OS X 10.2 or later.
To set up the TRITON Extreme for use with Mac OS X, fol-
low the steps below.
1 Use a USB cable to connect the TRITON Extreme's USB B
connector to the USB port of your computer.
2 Turn on the power of the TRITON Extreme.
3 Navigate to Macintosh HD➝Application folder➝Utility
folder, and double-click "Audio MIDI Settings."
4 Click the "MIDI Devices" tab, and verify that the TRI-
TON Extreme is displayed.
About the ports of the Mac OS X default MIDI driver
Port 1 of the driver (computer) corresponds to the TRITON
Extreme's KEYBOARD and SOUND ports.
TRITON Extreme's SOUND
TRITON Extreme's KEYBOARD
Input port settings in your application
Name on the TRITON
Name displayed by the application
Extreme
Port 1 (displayed in the MIDI input
Input KEYBOARD
settings)
Port 1 (displayed in the MIDI output
Output SOUND
settings)
About the TRITON Extreme and driver
ports
KEYBOARD device
Applications on your computer use this port to receive MIDI
messages from the TRITON Extreme (data from the key-
board, controllers, and sequencer).
SOUND device
Applications on your computer use this port to send MIDI
messages to the TRITON Extreme's internal sound genera-
tor, making it produce sound.
329