1
1
5
2
6
3
4
5
2
4
3
3
Setting the Fabric in an Embroidery Hoop
1
Mark the Centerlines on the right side of the fabric
with tailor's chalk.
2
Loosen the Hoop Tightening Screw on the outer hoop.
Lay the inner hoop and template on the fabric,
matching the centerlines.
3
Push them into the outer hoop.
Tighten the screw on the outer hoop to stretch the
fabric. Make sure that the fabric is stretched drum-tight
in the hoop.
4
Remove the template.
1 Fabric
2 Centerlines
3 Hoop Tightening Screw
4 Inner Hoop
5 Template
6 Outer Hoop
NOTES:
When placing the fabric on the Embroidery Hoop,
place the Outer Hoop on a flat surface.
For thin and stretchy fabrics use an adhesive type
Stabilizer (iron-on type) on the wrong side of the
fabric. More than one layer may be required.
77