Janome MEMORY CRAFT 9700 Instruction Book page 54

2
1
3
Restart for the same size.
Different size
Cancel
5.0
Default Default
1 9
Cancel Cancel
OK OK
52
To sew a shorter darning
To sew a darning with a length of less than 2 cm
(3/4"), first stop the machine after sewing the Required
Length, then press the Reverse Button. The Required
Length has now been determined.
Restart the machine and continue sewing until the
machine stops automatically.
1 Starting Point
2 Required Length
3 Reverse Button
To sew the same size darning
Simply restart the machine to sew another darning in
the same size.
To sew the next darn in a different size, press the
Cancel key.
To adjust the evenness of darning stitches:
You can correct the unevenness of darning by
pressing the or key.
If the left corner is lower than the right side, press the
key to correct it, and vice versa.