FABIA 2000
Inspection and Maintenance
Every 60 000 km (QG0)
Includes: Inspection every 30 000 km and additional operations stated in the table below
Work involved
–
Air filter: Clean housing, replace filter element
–
Fuel filter: replace (vehicles with diesel engine)
–
Ribbed V-belt: Inspect condition and for vehicles without tensioning pulley also the ten-
sion
–
Spark plugs: replace
–
Automatic gearbox: Inspect ATF
1)
Automatic transmission fluid for the automatic gearbox
Every 90 000 km (QG0)
Includes: Inspection every 30 000 km and additional operations stated in the table below
Work involved
–
Timing belt for camshaft drive: replace (ASY diesel engines up to 04.2001)
–
Timing belt and tensioning pulley for camshaft drive: replace (PD diesel engine up to
07.03)
–
Timing belt for camshaft drive: inspect (petrol engines) - every 90 000 km, then every 30
000 km
Every 120 000 km (QG0)
Includes: Inspection every 60 000 km and additional operations stated in the table below
Work involved
–
Timing belt and tensioning pulley (038 109 244 H)
gines other than the PD engine) - vehicles as of 05.2001 to 04.2002
–
Timing belt for camshaft drive: replace (PD diesel engine as of 08.03)
1)
When the tensioning pulley Spare Part No. 038 109 244 M is mounted after 120 000 km. on vehicles with a diesel engine during replacement of
the timing belt and the tensioning pulley the change interval of the timing belt should be altered from 120 000 km to 150 000 km. The customer
should be informed about the new service interval when the tensioning pulley is first replaced by a new tensioning pulley Spare Part No. 038
109 244 M by making an entry in the service plan, in the section „Workshop entries". Only the timing belt will be replaced at each next service
interval at 150 000 km.
Every 150.000 km (QG0)
Includes: Inspection every 60 000 km and additional operations stated in the table below
Work involved
–
Timing belt: replace (diesel engines other than the PD engine) - vehicles as of 05.2002
Edition 09.04
S00.5301.14.20
1)
level, if necessary top up
1)
for camshaft drive: replace (diesel en-
Inspection
02
Chapter
02-3
02-3
02-3
02-3
02-4
Chapter
02-3
02-3
02-3
Chapter
02-3
02-3
Chapter
02-3
02-2
7
page