FABIA 2000
Inspection and Maintenance
–
Proper operation of seat belts, seat belt height adjuster, power windows and sun roof
–
Inspect upholstery, interior trim, carpeting and footmats for cleanliness and damage
–
Inspect all switches, all electrical components, gauges/indicators and controls
–
Radio: Inspect for proper operation, store stations, set clock, encode
–
Reset service interval display
–
Power windows: Inspecting positioning
–
Key switch for airbag deactivation, front passenger side: Check function „ON/OFF" and
switch-over to the position „ON"
–
Fit net in luggage compartment (if available)
–
Check the car tool kit, spare wheel and accessories, that they have all been supplied and
are properly secured
–
Install the carpets supplied in the vehicle
–
Perform a test drive
Underside of vehicle (on lift platform)
–
Inspect underbody (underbody protection for damage)
–
Inspect for leaks and damage: Engine, gearbox, final drive, steering, brake system, axles,
joint boots. Check proper routing of the brake hoses and brake lines, fuel lines including
ventilation of the fuel system
–
Inspect tyres and wheels for damage
Concluding operations
–
Interrogate fault memory of all systems, if necessary erase
–
Remove protective seat covers
–
Remove recharging table (if affixed)
–
Complete the service schedule, affix the vehicle data sticker in the Service Schedule to
the floor of the luggage compartment next to the spare wheel„Next Service Date" sticker
and affix to the side of the dash panel on the driver's side, hand the card „Škoda Assist-
ance" to the customer
–
Final inspection to ensure proper condition for handover to the customer
Delivery Inspection (Export)
Inspections and operations to be completed
Vehicle (exterior)
–
Plastic and rubber parts: Inspect for cleanliness and damage
–
Inspect bodywork and paintwork for damage
–
Check operation of the tailgate lock and the fuel filler cap, door contact switch, operation
of the door handles, door locks and safety buttons, central locking from outside as well as
inside, child safety locks, ability to close all locks on the vehicle using all keys (including
the spare key)
–
Check operation of the anti-theft alarm system
–
Tighten the wheel bolts to specified torque (steel and light alloy wheels 120 Nm), fit wheel
caps
–
Check the tyre inflation pressure (including spare wheel), if necessary correct the tyre in-
flation pressure, fit valve caps
–
Vehicles in stock for more than 6 months: Change brake fluid
Edition 09.04
S00.5301.14.20
Inspection
02
02-6
02-6
02-6
02-6
02-7
02-7
02-3, 02-5
02-5
02-6
02-7
Chapter
02-7
02-7
02-5
02-5
02-5
02-2
3
page