Chapter 19 Eee Energy-Saving Configuration; Introduction To Eee Energy-Saving; Eee Energy-Saving Configuration List; Eee Energy-Saving Typical Examples - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

Chapter 19 EEE Energy-saving

eee is Energy Efficient Ethernet. After the port is enabled this function, switch will detect the

port state automatically. If the port is free and there is no data transmission, this port will

change to the power saving mode and it will cut down the power of the port to save the energy.

1. Enable EEE energy-saving function

no eee enable

Case：Configure the port 1 of switch as saving mode.

Below is the configuration steps:

Switch(config-if-ethernet1/1)# eee enable

Configuration

Enable the energy-saving

function of the port; the no

command disables the

energy-saving function of the

Troubleshooting