Installation Of Kit Parts - Honda EG3600CX Owner's Manual

OPTIONAL KIT PARTS
Four Wheel Kit Installation
1. Install the lock plate and four wheels on the wheel shaft using the
plain washers and split pins.
Install the front wheel shaft on the front side nearest the engine.
2. Install the wheel shaft assembly on the generator using eight 8
mm hex bolts.
TORQUE: 24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)
8 16 mm HEX BOLT (8)
8 mm
FLANGE NUT (8)
FRONT WHEEL SHAFT
58

INSTALLATION OF KIT PARTS

LOCK PLATE
LONGER
REAR WHEEL SHAFT
WHEEL (4)
20 mm PLAIN WASHER (5)
4 28 mm SPLIT PIN (4)
16
GENERATOR
SIDE