Honda EG3600CX Owner's Manual page 48

6. FUSE REPLACEMENT
If the fuse is blown, the starter motor will not work until it is replaced.
1. Turn the engine switch to the OFF position and remove the key
before checking or replacing the fuse.
2. Remove the fuse holder cover and pull the fuse out.
3. Replace the fuse with a fuse of the same type and rating.
Specified fuse:
If frequent fuse failure occurs, determine the cause and correct the
problem before attempting to operate the generator further.
Never use a fuse with a different rating from that specified. Serious
damage to the electrical system or fire may result.
4. Install the fuse holder cover in the reverse order of removal.
46
(CXS type)
10 A
FUSE (10 A)
FUSE HOLDER COVER