Replacing An Ethernet Pass-Thru Blade - Fujitsu Siemens Computers PRIMERGY BX600 S2 Operating Manual

Port Assignment
The following figure illustrates the assignment of the LAN ports of the Ethernet
LAN Pass-Thru-Blades in slots NET3 and NET4 to the channels of the Gigabit
Ethernet I/O modules (daughter cards) of the server blades in a configuration
with five 4-way server blades.
Gigabit Ethernet
pass-thru blade 3
1 2 3 4 5 6 7 8 9 10
A B A B A B A B A B A B A B A B A B A B
Server
blade 1
Figure 57: Port assignment to the Gigabit Ethernet I/O modules with five 4-way server blades
9.3

Replacing an Ethernet Pass-Thru Blade

V
CAUTION!
Ethernet pass-thru-blades must always be installed in slots NET1 and
NET3 first (see
An Ethernet LAN Pass-Thru-Blade is installed and removed in the same way as
a LAN switch blade (see
104
Server Server
blade 2 blade 3
page 101).
section "Installing a LAN Switch Blade" on page
Ethernet Pass-Thru Blade
Gigabit Ethernet
pass-thru blade 4
1 2 3 4 5 6 7 8 9 10
Server Server
blade 4 blade 5
PRIMERGY BX600 S2 Basic Unit
93).