Fujitsu Siemens Computers PRIMERGY BX600 S2 Operating Manual page 78

Adding a Server Blade to the System
Installation is the same as for the server blade (see
on page 78).
Inserting the Server Blade
V
CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the
static-Sensitive Devices" on page
Figure 36: Turning the eject handles into the unlocked position (2-way server blade)
Ê Press the touch points on the inside of the eject handles (1) of the server
blade to disengage the locking mechanism of the handles.
Ê Turn the eject handles outward (2) into the unlocked position.
The 4-way server blade has the same locking mechanism (see
Figure 37: Turning the eject handles into the unlocked position (4-way server blade)
I
How to install a server blade is described in the following using the
example of a 2-way server blade. 4-way server blades are installed in the
same way.
78
"Inserting the Server Blade"
section "Components With Electro-
25.
PRIMERGY BX600 S2 Basic Unit
Server Blades
figure 37).