External connection system
Applicable wire size
Operation indicator
Voltage*3
External
supply power
Current
Fuse rating*2
Internal current consumption 0.1A
Weight
Accessory
*1: Time in the I/O section.
*2: The maximum load current varies with the number of simultaneous ON
points. Refer to the following information:
Relationships between output load current (common current), number of
simultaneous ON points and ambient temperature
0.1A 16points
0.08A 16points
=1.28A
*3: A fuse-blown error will also be displayed when the external supply power
switches off.
*4: The fuse in the output unit is provided to prevent the external wiring from
burning out if the outputs of the unit are shorted.
Therefore, it may not protect the output elements.
The fuse may not be blown if the output elements are damaged in the fault
mode other than a short circuit.
I/O Specifications
40-pin connector
0.3mm2
None
12/24VDC
(10.2 to 26.4V, ripple percentage 5% or less)
1.65A for external output
0.05A for internal consumption only
2.0A fuse, unreplaceable
250g(0.55lb)
1 piece of external wiring connector
(soldered type)
=1.6A
Ambient temperature
3
51
55