Table of Contents
Advertisement
When using Mitsubishi equipment, thoroughly read this manual and the
associated manuals introduced in the manual. Also pay careful attention to
safety and handle the module properly.
These precautions apply only to the installation of Mitsubishi equipment and the
wiring with the external device. Refer to the user's manual of the CPU module
to be used for a description of the PLC system safety precautions.
These
SAFETY PRECAUTIONS
categories: "DANGER" and "CAUTION".
DANGER
CAUTION
Depending on circumstances, procedures indicated by
be linked to serious results.
In any case, it is important to follow the directions for usage.
Store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
[DESIGN PRECAUTIONS]
! Some faults of the GOT, this unit or connection cables may keep the
outputs on or off.
An external monitoring circuit should therefore be provided to check for
output signals which may lead to a serious accident.
Otherwise, mis-output or misoperation can cause an accident.
! SAFETY PRECAUTIONS !
(Always read before starting use)
Procedures which may lead to a dangerous condition and
cause death or serious injury if not carried out properly.
Procedures which may lead to a dangerous condition and
cause superficial to medium injury, or physical damage
only, if not carried out properly.
classify the safety precautions into two
DANGER
A-1
CAUTION
may also
Advertisement
Table of Contents
