Wireless Remote Controller Yag1Fb - Gree R410A Service Manual

3.4 Wireless Remote Controller YAG1FB

Notes:
a. Be sure that there are no obstructions between the receiver and the remote controller;
b. Do not drop or throw the remote controller;
c. Do not let any liquid into the remote controller and expose the remote controller to direct sunlight or any
place where is very hot.
d. This is only use for Hansol indoor unit. If press some button which is not available for the corresponding
function, the unit will keep the original running status.
3.4.1 Function of Press Buttons
1) ON/OFF
Press this button to turn on the unit. Press this button again to turn off the unit. Sleep function will be
canceled, while unit off.
2) MODE
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while
powered on. Under Auto mode the temperature will not be displayed; Under Heat mode, the initial value is 28℃
(82 ℉); Under other modes, the initial value is 25℃(77 ℉).
3) FAN
Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can be circularly selected.
After powered on, Auto fan speed is default. Under DRY mode, Low fan speed only can be set up.
Super Free Match
Service Manual
47 CONTROL