Gree R410A Service Manual page 48

Super Free Match
Service Manual
the LED of the indoor, and the unit will automatically select the suitable operation mode in accordance with the
room temperature to make indoor room comfortable.
5) FAN
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
6) SWING
Press this button to set up &down swing angle, which circularly changes as below:
This remote controller is universal. If any command
command as
indicates the guide louver swings as:
7) I FEEL:
Press this button to turn on I FEEL function. The units automatically adjust temperature according to the
sensed temperature. Press this button again to cancel I FEEL function.
8)
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this
button for the first time to start scavenging function; LCD displays"
start healthy and scavenging functions simultaneously; LCD displays"
third time to quit healthy and scavenging functions simultaneously. Press the button for the fourth time to start
healthy function; LCD display "
9) SLEEP:
◆ Press this button, can select Sleep 1 (
between these, after electrified, Sleep Cancel is defaulted.
◆ Sleep 1 is Sleep mode 1, in Cool or dry mode: sleep status after run for one hour, the main unit setting
temperature will increase 1℃, after 2 hours the setting temperature will increase 2℃, but the maximal setting
temperature is 30℃, then the unit will run at this setting temperature all along; In Heat mode: sleep status
after run for one hour, the setting temperature will decrease 1℃, after 2 hours the setting temperature will
decrease 2℃, but the minimal setting temperature is 16℃, then the unit will run at this setting temperature.
◆ Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep
temperature curve.
CONTROL 44
, then back to Auto.
Low speed Low-Medium speed
Medium-High speed
". Press this button again to repeat the operation above.
, or
". Press the button for the second time to
), Sleep 2 ( ), Sleep 3 (
, ,
Medium speed
High speed
is sent out, the unit will carry out the
" and " ". Press this button for the
) and cancel the Sleep, circulate
,