Gree R410A Service Manual page 175

6.2.5 Floor ceiling type
Remark: Prior to the assembly of the
◆ Removal panel grating module
Steps
Remove sub-assy of
front grill
◆ Remove right and left finishing plates
Steps
Remove right and left
finishing plates
◆ Remove panel parts
Steps
Remove panel parts
indoor unit, make sure the power supply is cut off.
Illustrations
Illustrations
Illustrations
Super Free Match
Service Manual
Operation Instructions
Move down the clip of the
sub-assy of fromt grill
until the front grill is open.
(As is shown in the graph,
arrow represents the
position of bottons. There
are two clips for each
grating.)
Operation Instructions
Remove the screws as
shown in the graph with
screwdriver and then push
upward to remove the right
and left finishing plates.
(As is shown in the graph,
arrow represents the
position of screws.)
Operation Instructions
Remove the screws shown
by the arrow in the graph
with screwdriver (two on
both right and left and 4 in
the front) and then remove
the panel parts.
171 MAINTENANCE
N