Craftsman Professional 137.212210 Operator's Manual page 29

the cutting head front to back
through the full motion of a cut along
the control arm. If the blade touches
the inside of the control arm, readjust
the setting.
Fig. AA
SLIDING THE REAR EXTENSION
SUPPORT BAR (FIG. BB)
WARNING
!
To avoid possible personal injury
or damage to the miter saw due
to tipping, do not operate the saw
without the Rear Extension Support
Bar.
Loosen the two screws (1) and extend
the rear extension support bar (2) by
sliding it out to match position, tighten
the two screws.
Fig. BB
1
2
2
1
29 29