Talking Caller Id - Panasonic KX-TG7892AZ Operating Instructions Manual

R If the phone number is stored in the
phonebook with its name, the caller's name
will also be displayed.
R Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your service
provider/telephone company.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company. This feature
allows you to receive calls while you are
already talking on the phone. If you receive a
call while on the phone, you will hear a call
waiting tone. If you subscribe to both Caller
ID and Call Waiting with Caller ID services,
the 2nd caller's information is displayed on the
base unit or handset that is in use after you
hear the call waiting tone.
Handset / Base unit
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.

Talking Caller ID

Handset / Base unit
This feature let you know who is calling by
announcing the caller information.
To use this feature, you must:
– subscribe to a Caller ID service of your
service provider/telephone company.
– turn this feature on (page 38, 40).
– store the name and phone number in the
phonebook (page 30).
Phonebook name announcement
When caller information is received from your
service provider/telephone company and it
matches a phone number stored in the
phonebook, the stored name is announced
following every ring.
If that phone number has not been stored in
the phonebook, the caller information is
announced.
Note:
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R The announcement is heard at the same
level as the ringer volume (page 22, 28, 37,
40).
R Depending on the number of rings setting
(page 60), the answering system may
answer calls before announcing the caller
information.
R When you receive a call while on the
phone, the 2nd caller information is not
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
Ringer ID for handset
You can select the desired ringer tone to a
group that each phonebook entry is assigned
(page 30). When a call is received from a
caller assigned to a group, the ringer tone you
selected for that group rings instead of the
called line's ringer tone (page 18, 36, 37) after
caller information is displayed. If you select
"Current ringer" (default), the unit uses
the called line's ringer tone you selected on
page 37 when calls from this group are
received.
R The ringer may be changed after the 2nd
ring.
Handset
1
MFN a MMENUN
Caller ID Service
47