Call Share - Panasonic KX-TG7892AZ Operating Instructions Manual

*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
To release hold on the landline:
Press M N.
R Another handset user can take the call
by pressing M
R The base unit user can take the call by
pressing MZN.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1
Press MMUTEN during conversation.
R MMUTEN flashes.
2
To return to the conversation, press
MMUTEN again.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Recall for landline calls
MRECALLN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the recall time, see page 39.
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party's telephone.
Making/Answering Calls Using the Handset
N.
Press MNOISE REDUCTIONN to turn on/off
while talking.
Note:
R When this feature is turned on,
displayed while talking.
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
R When both the "Equalizer" setting and
noise reduction are activated,
shown on the display.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
Press MMENUN while talking.
2
MbN: "Equalizer" a MSELECTN
3
MbN: Select the desired setting.
4
Press MOKN to exit.
Note:
R When this feature is activated,
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.

Call share

You can join an existing outside call.
n While another unit is on a cellular call:
1
To join the conversation, press
MCELLN.
R You can join the conversation when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
2
MbN: Select the desired cellular phone.
a MSELECTN
is
is
is
23