Pioneer DVR-65H-S Training Manual page 42

No. Item
Time-code data of the DVdecode Stream, or
TC
response data of the Time Code command
9
RD Rec Date of DVdecode Stream
RT Rec Time of DVdecode Stream
ASPECT Aspect Ratio of DVdecode Stream
CGMS of DVdecode Stream (from left to right,
CGMS CGMS data of bits 5-4: Audio ch2, bits 3-2:
Audio ch1, and bits 1-0: Video)
0
APSTB APS trigger bit of DVdecode stream
DEC With/without DVdecode stream input
SF Sampling Frequency of DVdecode Stream
-
QU QUANTIZATION of DVdecode Stream
AMODE AUDIO MODE of DVdecode Stream
Whether Yes (in the process of requesting DV
=
[DVencode:XXX]
output) or No is indicated in XXX
TC TIME CODE of DVencode stream
~
RD REC DATE of DVencode stream
RT REC TIME of DVencode stream
ASPECT Aspect Ratio of DVencode stream
CGMS of DVencode stream (common to
!
CGMS
video, audio ch1 and audio ch2)
APSTB APS trigger bit of DVencode stream
Description Remarks
Stream time-code data are obtained when playback in
the forward direction is performed. Otherwise, time-code
data are obtained through an AV/C command.
Recording of DV input cannot be performed unless the
value of CGMS is 00.
With input: Signal type (525-60, 625-50, 1125-60, 1250-
50, or Invalid) is indicated, Without input: "No" is
indicated.
If SF is 44 kHz, it is considered that 44.1-kHz audio is
input, and sound is muted on the unit.
Normally, Yes is indicated only with HDD or DVD
playback
Normally, sources other than CGMS=00 are not output.
42