Pioneer DVR-65H-S Training Manual page 39

Other Errors (continued)
Error Message
SW Vpb mode *
SW Vrec mode *
NV Pck MK Err
NV Pck DMA Er
Cell Close NG
Relocation Do
Something *
Status NG *
Irr Action *
Abort *
BusReset Done
Repair Excec
Format Excec
BUG
PARAM NO ACCP
DRAM CLR Err
V Categ ID NG
V Cate Inf NG
V Ext TY NG
V Ext MAX Ovr
V ExtToo Big
Over Heat
Error related to HDD
Error Message
HDD unauthor
HDD Destroy
TT Rec Over
HDDReset Done
Task No Activ
HDD Buff High
HDD Trans Err
HDD Zero WR
HDD Initialize
HDD MBR NG
HDD SIG NG
HDD INFO BAD
HDD IRRG POFF
HDD SMART NG
No Error
Error Message
Non Err *
Notes;
• Any error message marked with ∗ is displayed "RecErr : ---------"
on the Subscreen 1 of the fourth screen.
• In a case of an error in the drive system, scratches or dirt on a disc,
or a problem of the drive itself (dirty pickup) may be suspected.
Switching to video playback routine is required.
Switching to video recording routine is required.
Error in creating NaviPack
Inappropriate NaviPack DMA
Cell Close NG
VR-recording data was relocated
undetermined error
Abnormality in change of statuses
Incorrect action
Cancellation
Bus Reset has been excecuted.
Repairing has been executed.
Formatting has been executed.
Some bugs
Recording parameter is not matched.
Video Mode DRAM (Stream Buffer) Clear failure
Inappropriate Category ID
Inappropriate Category information
Type NG
Count Max exceeded
The extension file is too large.
Abnormal temperatute
DVR-65H-S & DVR-520H-S
Inconsistent HDD serial No.
HDD is not recognized on the bus.
Title recording time full
HDD Reset executed
Task has not been activated.
High-level process executed for the HDD Buffer
DMA error in HDD copy transfer
MBR readout generated
HDD initialized
Inconsistent MBR data
Inconsistent HDD Management Data Magic
Incorrect HDD Management Data
Abnormal power off
Inappropriate HDD SMART
Normal
39
Description
Description
Description
Abbreviations:
ECC = 4 byte Code for Error Correction
UDF = Universal Disc Format
PCA = Power Calibration Area
OPC = Optical Power Control
NWA = Next Writable Address
VMG = Video Manager
RMA = Recording Management Area
MKB = Media Key Block
TMP_VMGI = Temporary Video Manager
Information
Border = from Lead-in to Lead-out