Pioneer DVR-65H-S Training Manual page 23

Input Flow of the ID No. and ID data when exchanging HDD, MAIN Assy or Drive Assy
• When exchanging HDD or MAIN
Assy, or both exchanged
• When exchanging HDD
When displayed following message at
Power on
FL Tube : [HDD ERR]
CRT display :
DVR-65H-S
DVR-520H-S
HDD information is not correct.
New HDD/when
there is error
on recorded contents
When displayed following message at
Power on
DVR-65H-S
FL Tube : [HDD ERR]
DVR-520H-S
CRT display :
HDD information is not correct.
Execute HDD Initialize from
the Disc Setup menu.
*Use Remote Control of
the model
Execute
HOME MENU → Disc Setup → Intialize
HDD → Start
Disc Setup
Basic
Initialize
Finalize
Initialize HDD
Also exchanging DRIVE Assy simultaneously
Deletion of the CPRM ID No.(when ID No. is registered.)
Exchanging to the original HDD(when
Initialize Start
When exchanging Drive Assy
Power → ON
Only exchanging
Drive Assy
Confirmation of the CPRM ID No.
Input of the CPRM ID No. and ID data
Power → OFF →
ON
Normal operation mode
there is no error on
the recorded
contents.)
End
[CAUTION]
All recorded data are deleted if the HDD is intialized.
Take care that restoration of the user's data recorded on the HDD is totally
impossible.
Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
*Goes to normal operation
with no caution
End
23
When displayed "CPRM ERR"
When displayed following message at
Power on
FL Tube : [CPRM ERR]
CRT display :
CPRM information is not correct.
End