Hardware Overview; Connections - D-Link DAP-3310 User Manual

Section 1 - Product Overview
1 LAN.Port
2 LAN.(PoE).Port
3 Reset.Button
Grounding.Wire.
4
Connector
Note: The DAP-3310 uses a proprietary PoE injector which is needed to function correctly. Only use the included PoE
injector as other power sources such as 3rd party PoE injectors or PoE switches or hubs may damage the DAP-3310 or
cause it to operate unreliably, and will also void the warranty.
D-Link DAP-3310 User Manual

Hardware Overview

Connections

1
Connects to 10/100 Ethernet devices such as computers, switches, and hubs.
Power is supplied through the LAN cable connected in this port via the Power over Ethernet
Injector. Please see "Installation" on page 11 for more details on how to correctly power the
DAP-3310 and connect to other networking devices.
Hold the reset button for at least 5 seconds to reset the device back to the factory default
settings. All the LEDs will turn on for 2 second and then begin the reboot process.
Connects to a grounding wire.
2
4
3
9