Time And Date - D-Link DAP-3310 User Manual

Section 3 - Configuration
The Time Server Setup page allows you to configure,
update, and maintain the correct time on the internal
system clock. In this section you can set the time zone
that you are in. Daylight Saving can also be configured
to automatically adjust the time when needed.
Enable NTP NTP is short for Network Time Protocol.
Server: This allows the system clock to be updated
automatically by using an NTP server.
NTP Server Enter the NTP server or select one from the
Used: drop-down menu.
Time Zone: Select the Time Zone from the drop-down
menu.
Daylight To set Daylight Saving time manually, click the
Saving Time: Daylight Saving Time check box. Next, use the
drop-down menu to select a Daylight Saving
Offset and then enter a start date and an end
date for daylight saving time.
Date and Time: To manually set the time, enter the Year, Month,
Day, Hour, Minute, and Second and then click
Save. To avoid having to manually set the time,
you can also click the Copy.Your.Computer's.
Time. Settings button at the bottom of the
page to have the DAP-3310 automatically
set the time based on the system clock of
the computer being used to configure the
DAP-3310.
D-Link DAP-3310 User Manual

Time and Date

53