Connect.to.a.wireless.network; Using Windows - D-Link DAP-3310 User Manual

Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
®
Pack 2 users. If you are using another company's utility or Windows
adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows
XP utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on
the center of the bubble to access the utility.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View. Available.
Wireless.Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal, but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking.
Basics section in this manual for more information.
D-Link DAP-3310 User Manual

Using Windows

or
XP
®
2000, please refer to the user manual of your wireless
®
®
69