D-Link DAP-3310 User Manual page 26

Section 3 - Configuration
DTIM Interval
Set a Delivery Traffic Indication Message
setting between 1 and 255. The default value
is 1. DTIM is a countdown informing clients of
the next window for listening to broadcast and
multicast messages.
Transmit
This setting determines the power level of
Power:
the wireless transmission. Transmitting power
can be adjusted to eliminate overlapping of
wireless area coverage between two access
points where interference is a major concern.
For example, if wireless coverage is intended
for half of the area, then select 50% as the
option. Use the drop-down menu to select
100%, 50%, 25%, or 12.5%.
Spanning Tree Select Enable or Disable. Enabling this option
Protocol:
will help prevent bridge loops and will provide
nearby AP's with the information needed to
reliably route the network should one of the
other devices fail.
Ack Time Out:
To effectively optimize throughput over
long distance links, enter a value for
Acknowledgement Time Out from 1 to 372
microseconds in the 2.4 GHz in the field
provided.
Slot Time: This setting is used to specify an amount of
time the AP will wait after a collision before
retransmitting a packet. Reducing the slot
time decreases the overall back-off, which will
increase throughput.
D-Link DAP-3310 User Manual 26