Weslo pursuit CT 3.8 R User Manual page 9

9. Attach the Handlebar (53) to the Upright (13)
with two M8 x 65mm Button Bolts (72), two M8
Curved Washers (46), and two M8 Locknuts
(10).
10. The Console (16) requires four "AA" batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components. Remove the battery cover, insert
the batteries into the battery compartment, and
reattach the battery cover. Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
11. While another person holds the Console (16)
near the Upright (13), connect the console wire
to the Extension Wire (52).
Insert the wires downward into the Upright (13).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Upright (13) with four M4 x
15mm Self-tapping Screws (47).
9
10
46
13
10
Screw
16
11
Avoid pinching
the wires
47
13
9
53
72
Battery Cover
Batteries
16
52
Console
Wire