Unpacking Instructions - Life Fitness 9500HR Assembly Instructions Manual

Life Fitness Models 9500HR / 9100 / 8500 / C9i / C7i Exercise Bike Unpacking Instructions

UNPACKING INSTRUCTIONS

Tools Required: 7/32" Allen Wrench (supplied with C9i and C7i Only)
1. Remove the four straps from the corrugated shipping container and remove the TOP TRAY (A).
2. Carefully lift and remove the CENTER SPACER (B).
3. Remove the DISPLAY CONSOLE BOX (C) and set aside. Lift and remove the two REAR SUPPORT POSTS (D).
4. Lift and remove the two FRONT SUPPORT POSTS (E). Carefully lift and remove the SHIPPING SLEEVE (F).
5. Remove the SHIP KIT (G) and set aside.
Locate the 7/32" ALLEN WRENCH and four 3/8-16 x ¾" BUTTON HEAD SCREWS (H) from the hardware bag located
6.
in the SHIP KIT (G).
Carefully remove all protective plastic wrapping.
7.
The CONSOLE SUPPORT (J) is shipped hooked onto the top of the MONOCOLUMN (K). Carefully slide the
8.
CONSOLE SUPPORT upward to disengage it from the MONOCOLUMN. Carefully remove the CONSOLE SUPPORT
SPACER (L).
CAUTION: BE CAREFUL NOT TO DAMAGE THE
WIRE HARNESS (M) WHEN HANDLING
THE CONSOLE SUPPORT (J).
Pivot the CONSOLE
9.
SUPPORT (J) upward. Align
and insert the console
support mounting flange into
the top of the
MONOCOLUMN (K). Secure
the CONSOLE SUPPORT to
the MONOCOLUMN using
the four 3/8-16 x ¾"
BUTTON HEAD SCREWS
(H). Tighten the screws to
15-20 ft. lbs.
CAUTION: BE CAREFUL NOT
TO DAMAGE THE WIRE
HARNESS (M) WHEN
ATTACHING THE CONSOLE
SUPPORT (J) TO THE
MONOCOLUMN (K).
Carefully lift the exercise bike from the BOTTOM
10.
TRAY (N).
Follow the Assembly Instructions included in the
11.
parts bag to complete the assembly of your
exercise bike.
SAVE YOUR PACKING MATERIALS IN CASE OF RETURN
J
H
M
K
C
D
Ship Kit (G) Contents:
' Handlebars
' Parts Bag
' Assembly Instructions
' Operation Manual
G
' Top and Bottom
Polar Covers
( 8500 / 9100 / 9500HR Only )
' Seat Post Covers
IMPORTANT
N E
M051-00K63-B006
A
F
B
L