USB Storage Medium Error Messages
WRONG MEDIA
USB OVERLOAD
Error Messages on the Transmission Report
Error Messages on the Transmission Re-
port
General scanner error
User break
Busy or no fax answer
Subscriber has disconnected
Possible Cause(s)
The inserted USB storage medium cannot be
accessed (no read/write access). It is possible
the USB storage medium is damaged or uses
an unsupported file system. The device only
recognises storage media which are format-
FAT16
FAT32
ted with
or
ported.
The power consumption is too high or a USB
device is defective. All USB devices are deac-
tivated.
1.
Remove all connected USB devices.
Press o.
2.
3.
Insert another USB device into the de-
vice. Note with which USB device the er-
ror message occurs.
You can only connect one high power device
(USB 2.0) to each USB connection. Do not
connect additional devices—such as batter-
ies, fans, charging devices—to your ma-
chine.
Possible Cause(s)
During the scanning process, an error oc-
curred, for example, a document jam (see
also chapter on
Fixing a Document Jam
page 112).
The transmission process was interrupted by
pressing the j-key on the transmitting unit.
If the subscriber is busy, the device dials the
number again after some time. After six at-
tempts, the transmission process is can-
celled. Try again at a later date.
Call the number and check whether the
number is a fax number and whether the
connected fax device is ready to receive
(whistling tone or silence). Press FAX or o
to send the message manually.
Ask the recipient whether the device is ready
to receive.
Service · Error Messages and Possible Causes¦ 125
NTFS
.
is not sup-
,
EN