Table of Contents
Advertisement
LCD
display!
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message
CALL SERVICE 1
CALL SERVICE 2
CHECK COVER
CHECK DOCUMENT
CHECK MEMORY
MEMORY FULL
NO RESPONSE
NO TAD GREETING
NO TRNS-GREET.
OUT OF PAPER
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
TRANSMIT ERROR
UNIT OVERHEATED
There is something wrong with the unit. Contact our service
personnel.
The cover is open. Close it.
The document is not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers and try again (p. 84). If the problem remains, adjust
the feeder pressure (p. 83).
Attempted to transmit a document longer than 600 mm. Press the
STOP
button to remove the document. Divide the document
into two or more sheets and try again.
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
There is no room left in memory to record a message. Erase
some or all of the messages (p. 62, 68).
The other party's fax machine is busy or ran out of recording
paper. Try again.
Your TAD/FAX greeting is not recorded. Record a greeting
message (p. 57).
Your message transfer greeting is not recorded. Record a
greeting message (p. 72).
The unit ran out of recording paper. Install a recording paper roll
(p. 21).
The other party's fax machine does not have a polling feature.
Check with the other party.
The other party's fax machine is busy or ran out of recording
paper. Try again.
The document is jammed. Remove the jammed document (p. 82).
A transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.
Error Messages
Cause & Remedy
77
Advertisement
Table of Contents
