Transmission Method - Hitachi CP-D27WN User Manual

6. Network Bridge Function

6.4 Transmission method

The transmission method can be selected from the menus, only when the
( OPTION menu > SERVICE > COMMUNICATION in the Operating Guide)
6.4.1 HALF-DUPLEX
This method lets the projector make two way communication, but only one
direction, either transmitting or receiving data, is allowed at a time.
The method does not allow the projector to receive the data from the computer
while waiting for response data from an external device. After the projector
receives the response data from an external device or the response limit time is
past, the projector can receive the data from the computer.
That means that the projector controls transmitting and receiving the data to
the instructions below.
Transmitting data
from an external device. (
in the Operating Guide)
OFF 1s
54
OPTION menu > SERVICE > COMMUNICATION
2s 3s ( OFF)
Transmitting data
time
Transmitting data
External device