Correcting The Keystone Distortions - Hitachi CP-D27WN User Manual

Operating

Correcting the keystone distortions

1.
Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting the
distortion.
2.
Use the ◄/► cursor buttons for adjustment.
To close the dialog and complete this operation, press the
KEYSTONE button again. Even if you do not do anything, the
dialog will automatically disappear after about ten seconds.
● The adjustable range of this function varies for each input signal. For some input,
this function may not work well.
● When the projector is inclined to near ±6 degrees or over, this function may not
work well.
● This function will be unavailable when the TRANSITION DETECTOR is activated
82).
(
● The OSD menu might be displayed outside of the image display area depending
on the adjustment value of the ASPECT, D-ZOOM and
the values of ASPECT, D-ZOOM and
26
KEYSTONE. Changing
KEYSTONE may  x the symptom.
KEYSTONE button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
OFF DOWN
MY BUTTON
2
KEYSTONE 1 MUTE