7. Network Bridge Function
7.4 Transmission method
The transmission method can be selected from the menus, only when the
OPTION menu >
7.4.1 HALF-DUPLEX
This method lets the projector make two way communication, but only one
the instructions below.
Computer
Transmitting data
Discarding data
the
OFF
1s
86
> COMMUNICATION in the
TCP/IP data
Protocol change
Response data
OPTION menu >
)
2s
OFF)
Serial data
RS-232C
RS-232C cable
Transmitting data
Response limit
time
Response data
Discarding data
> COMMUNICATION in
)