Table of Contents
Advertisement
peripheral plug-in harnesses
super bright blue led, 2-pin white plug
The super bright LED operates at (+) 2V DC. Make sure the LED wires are not short-
ed to ground as the LED will be damaged. Multiple LEDs can be used, but they must
be wired in series. The LED can be top-mounted or flush-mounted. If top-loading the
LED with a bezel, the LED fits into a 5/16-inch mounting hole. If flush-mounting the
LED from the back of a panel, drill a mounting hole using a 17/64-inch drill bit. Be
sure to check for clearance prior to drilling the mounting hole.
plain-view 2 valet
The Valet/Program switch should be accessible from the driver's seat. It plugs into the
blue port on the side of the unit. Consider how the switch will be used before choos-
ing a mounting location. Check for rear clearance before drilling a 9/32-inch hole
and mounting the switch.
37
© 2004 directed electronics, inc.
Hide quick links:
Advertisement
Table of Contents
