Table of Contents
Advertisement
SECTION 4: TROUBLESHOOTING SECTION
WARNING: Inspection, testing and repair of electrical equipment should only be performed by a qualified ser-
vice technician. Many of the tests require that the unit have power to it and live electrical components be
exposed. USE EXTREME CAUTION WHEN TESTING THE MACHINE.
Problem: Water temperature is less than required.
1. Low incoming water temperature. Compare to data plate.
2. No power to heater. Check wiring, replace if necessary.
3. Thermostat out of adjustment. Adjust or replace thermostat as required.
15
COMMON PROBLEMS
200 Series Technical Manual
7610-100-45-00 Rev. E (02/10/2006)
Hide quick links:
Advertisement
Table of Contents
