Elation PLATINUM SPOT 5R PRO User Manual page 32

the Mode/Esc Button for 3 seconds to regain access to the menu commands.
9.4.4 Temperature C/F – This function changes the temperature the unit will display
from either Celsiusor Fahrenheit. Fahrenheit is set as the default measurement.
9.4.5 Initial effect – This function allows a user to create and assign a custom "Home
Position" into the fixture. Adjusting the Pan and Tilt values then locking those values into
the fixture's internal memory creates the new "Home" position.
8.4.6 Wireless DMX
This section will control the functionality of the built-in wireless DMX receiver. See page
37 for more information on operating this fixture via Wireless DMX.
9.4.7 Restore Default – This function is used to restore the factory settings of the
device. All settings will be set back to the default values (shaded). Any edited scenes will
be lost.
9.5 Reset Functions: The reset function returns a motor to the "Home" position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
Reset All: This function will reset all internal motors to the home position.
Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
Reset Colors: This function will only reset the color wheel to the home position.
Reset Gobos: This function will only reset the gobo wheels to the home position.
Reset Shutter: This function will only reset the blackout shutter to the home position.
Reset Others: This function will reset all other motors not associated with any in the
previously listed reset commands to the home position.
9.6 Effect Adjust:
©Elation Professional, Los Angeles, Ca 32 www.ElationLighting.com
Platinum Spot 5R Pro™